Zum Inhalt springen

Industrial Epoxy Flooring in Saudi Arabia

A floor is only as good as the slab underneath it. We prepare mechanically with our own machines, then apply the system — one crew, one responsibility.

The systems we apply

  • Solvent free epoxy coating for workshops and warehouses, where traffic is wheeled and the demand is cleanability.
  • Self levelling epoxy, two to three millimetres, where a seamless flat surface is required.
  • Epoxy mortar screed where point loads, impact and forklift turning destroy thinner systems.
  • Conductive and ESD epoxy for electronics production and areas where flammable material is handled.
  • Anti slip finishes for ramps, wash bays and wet areas.
  • Skirting and coving at wall junctions so the floor can be washed without soaking the wall base.

Why epoxy floors fail in this market

Almost every failure we are called to repair comes from the same four causes, and none of them is the paint.

  • Applied over a sealed, polished or curing-compound slab, so there is no mechanical key and the system peels in sheets.
  • Applied over a damp slab, so vapour pressure lifts the coating months later.
  • Applied over concrete soaked with oil, which has to be drawn out before anything is laid.
  • Expansion joints coated across instead of being carried through, so the floor cracks along the joint line.

Preparation is the job

We do not acid etch and we do not rely on a hired machine. Surfaces are opened mechanically with our own German shot blasters, and the profile is set to the CSP the system requires. Read how we do it on the concrete shot blasting page.

Where we work

Food and beverage plants, pharmaceutical facilities, warehouses and distribution centres, workshops and vehicle bays, showrooms, car parks and basements. Madinah, Jeddah and the Makkah region as standard, Riyadh and Dammam on request.

Approvals

Approved applicator for Sika and Saveto systems. MODON pre-qualified applicator. ISO 9001, ISO 14001 and ISO 45001 certified. Saudi Aramco approved vendor 10116736.

Tell us about the floor

Send the area, the slab condition and what the space is used for, and we will come back with the system, the preparation and the programme.

Request a quote Contact us